ドライバーインストーラー For Microsoft Windows
English is here.
本ソフトウェアをご使用になる前に、以下の使用条件をよくお読み下さい。 ご使用になられた時点で、下記使用条件に同意して株式会社リコー（以下、リコー）との間で契約が成立したものとさせていただきます。 −１− 本ソフトウェアおよび本ソフトウェアの更新版ならびにそれらの複製物（以下、総称して、本ソフトウェア）に関する権利は、リコーまたは第三者に帰属します。−２− リコーは、本ソフトウェアの使用者（以下、ユーザー）に対し、 本ソフトウェアに対応するリコー製品を利用する目的で本ソフトウェアを使用する非独占的権利を許諾します。
−３− ユーザーは、本ソフトウェアおよび関連するドキュメンテーションについて、 いかなる修正、改造、翻訳、リバースエンジニアリング、デコンパイル、ディスアセンブル等することはできません。−４− ユーザーは、本ソフトウェアにより、ユーザーの利用しているPC等の機器の情報が収集され、 かつリコーまたはリコーが指定する第三者の管理するサーバーへ送信されることに同意します。
−５− ユーザーは、本ソフトウェアの更新版が自動的にインストールされる場合があることに同意します。−６− リコーおよびリコーのライセンサーは、本ソフトウェアを使用して得られる性能または結果、 および特定目的への適合性、または本ソフトウェアに瑕疵がないこと、その他本ソフトウェアに関していかなる保証もいたしません。
−7− リコーおよびリコーのライセンサーは、本ソフトウェアの使用に付随または関連して生ずるデータの喪失もしくは欠陥、 またはこれらにより生じた損害（収入または利益の逸失を含みます）について、直接的または間接的かを問わず、いかなる場合においても一切の責任を負いません。−8− ユーザーは、日本国政府または該当国の政府より必要な許可等を得ることなしに、本ソフトウェアの全部または一部を、直接または間接に輸出してはなりません。
−9− 本ソフトウェアは、第三者が有するソフトウェア・プログラム（オープンソースソフトウェアを含みます）、 コードまたはライブラリを含む場合があり（以下、当該プログラム等を「第三者製プログラム」と総称します）、 お客様が第三者製プログラムをご使用になる場合は、それぞれの第三者製プログラムに適用される個々の使用条件に従う必要があります。 当該使用条件は、ReadMeファイルまたはダウンロードメディア等にて確認できます。 お客様は、本契約に同意されることで、かかる一切の使用条件にも同意されたものとみなされます。 本契約のその他の定めにかかわらず、第三者製プログラムは、無保証（明示または黙示の別を問いません）かつ現状有姿でリコーから提供されます。
この度は弊社製品をお買いあげいただき、誠にありがとうございます。 このファイルにはプリンタードライバーを使用するための情報が記載されています。 ご使用の前に必ずお読みいただきますようお願いいたします。
上記OS環境が動作するコンピューター
本セットアッププログラムを使用するときは、Administrators権限が必要です。
インストール前に確実にすべてのアプリケーションを終了させてください。なお、OS標準の[プリンターの追加]からプリンタードライバーをインストールすることも可能です。インストールの手順はOSのHelpをご参照ください。
本製品をすでにご使用の方は、以下の手順に従ってプリンタードライバーの更新作業を行ってください。
更新前に確実にすべてのアプリケーションを終了させてください。
本文書に記載されている社名や製品名は、各社の登録商標もしくは商標です。
Driver Installer For Microsoft Windows
YOU, THE END USER, SHALL USE THIS SOFTWARE INCLUDING ANY FUTURE RELEASES, REVISIONS, UPDATES OR ENHANCEMENTS TO THE SOFTWARE (COLLECTIVELY, "THE SOFTWARE") ACCORDING TO THE TERMS OF THIS AGREEMENT (“THIS AGREEMENT”). BY INSTALLING OR USING THE SOFTWARE, OR CLICKING ON THE "ACCEPT" BUTTON, YOU ARE AGREEING TO BE BOUND BY THESE TERMS. IF YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT, YOU MAY NOT INSTALL THIS SOFTWARE INTO ANY COMPUTER.
The Software is licensed for use by you for the equipment packaged with the Software or designated by its supplier or us ("the Equipment"). You are permitted to use the Software on any computer which permits electronic access to the Equipment. You are not permitted to rent or lease the Software or to transfer your rights under this license to a third party.
The license of the Software under this Agreement is effective until terminated. The license of the Software under this Agreement will terminate where you fail to comply with the terms of this Agreement. Upon termination, you agree to destroy all copies of the Software and its documentation.
You own, if any, only the magnetic media on which the Software has been delivered. It is an express condition of this Agreement that the right, title and interest in and to the Software shall be retained by us or our licensors.
You may not make any copies nor cause any person to make copies of the Software except such copies as are necessary for licensed use and one copy for operational security. Any such copies are subject to the conditions of this Agreement. You may not modify, adapt, merge, translate, reverse engineer, decompile, disassemble or create derivative works based on the whole or any part of the Software or its associated documentation. You may be held legally responsible for any copyright infringement, unauthorized transfer, reproduction or use of the Software or its documentation.
You acknowledge and agree that any future releases, revisions, updates or enhancements to the software may be automatically installed in your computer.
You acknowledge that the Software may contain software programs, code or libraries owned by third parties and/or licensed pursuant to one or more open source software licenses (“Third Party Programs”). Your use of such Third Party Programs is subject to additional terms and conditions which may be found in the installation text files or download media that we may provide to you in connection with the Software. Only when expressly permitted by applicable law without the possibility of contractual waiver or required by the license terms of a Third Party Program, we waive the prohibition in Section 4 against reverse engineering or decompiling, but only for the limited purpose required by the applicable license or law and not to create any software which is substantially similar to the Software. Notwithstanding anything herein to the contrary, all Third Party Programs are furnished by us without support, “as is” and without any warranties of any kind, express or implied.
YOU CONSENT TO THE COLLECTION AND TRANSMISSION BY THE SOFTWARE OF INFORMATION ABOUT YOUR COPIERS, PRINTERS, MULTI FUNCTIONAL DEVICES, AND YOUR COMPUTERS TO OUR REMOTE SERVER, WHICH MAY BE LOCATED OUTSIDE THE COUNTRY WHERE YOUR DEVICES ARE LOCATED. THE INFORMATION MAY INCLUDE, BY WAY OF ILLUSTRATION AND NOT LIMITATION: (I) IDENTIFICATION OF ANY NETWORKED OUTPUT DEVICE (E.G., MAKE, MODEL AND SERIAL NUMBER) AND INFORMATION IN CONNECTION WITH YOUR COMPUTER (E.G., OPERATING SYSTEM NAME AND ITS VERSION), (II) DEVICE USAGE, METER AND DIAGNOSTIC INFORMATION (E.G., NUMBER OF PAGES PRINTED, ERROR CODES, ETC.), AND (III) VERIFICATION OF LICENSE COMPLIANCE. THIS SOFTWARE CANNOT AND DOES NOT COLLECT DOCUMENT CONTENT OR PERSONALLY IDENTIFIABLE INFORMATION ABOUT YOU. WE MAY ALSO USE THIS INFORMATION FOR ITS REGULAR BUSINESS PURPOSES INCLUDING BUT NOT LIMITED TO PRODUCT DEVELOPMENT, RESEARCH AND MARKETING, SO LONG AS THE INFORMATION IS COLLECTED ANONYMOUSLY IN A FORM THAT DOES NOT PERSONALLY IDENTIFY YOU.
The media, if any, not the Software contained therein, is warranted to the original purchaser against defects in material and workmanship for a period of one year from the date of original purchase of the Equipment. Defective media will be replaced when it is returned to your supplier, postage prepaid, along with a copy of the purchase receipt. THESE RIGHTS ARE YOUR SOLE AND EXCLUSIVE REMEDY, WHETHER IN TORT, CONTRACT, OR OTHERWISE. IN NO EVENT SHALL WE OR SUPPLIER, OWNER OF THE SOFTWARE OR THEIR LICENSORS BE LIABLE FOR ANY DAMAGES (INCLUDING ANY FOR LOSS OF INFORMATION, PROFITS, SAVINGS OR BUSINESS INTERRUPTION OR OTHER DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES) ARISING OUT OF THE SOFTWARE OR THE USE THEREOF, OR THE INABILITY TO USE THE SOFTWARE.
You acknowledge that the export of the Software is governed by the export control laws of the United States and other countries. You agree to comply with all such export control laws.
If any provision or portion of this Agreement shall be found to be illegal, invalid or unenforceable, the remaining provisions shall remain in full force and effect. The governing law and jurisdiction for this Agreement will depend upon where you purchased or obtained the Software, as follows: (a) if you purchased or obtained the Software in the Americas, this Agreement shall be deemed made under the laws of the State of New York, USA, excluding the choice of law and conflict of law provisions, and any claim against us may be enforced or disputed only and exclusively in the courts of the State of New York, (b) if you purchased or obtained the Software in Europe, the Middle East or Africa, this Agreement shall be deemed made under the laws of the England, excluding the choice of law and conflict of law provisions, and any claim against us may be enforced or disputed only and exclusively in the courts of England, or (c) if you purchased or obtained the Software in the regions other than those provided in clauses (a) and (b) above, this Agreement shall be deemed made under the laws of Japan, excluding the choice of law and conflict of law provisions, and any claim against us may be enforced or disputed only and exclusively in the courts of Tokyo, Japan. To the extent permitted by local law, the parties hereto waive any right they may have to trial by jury.
This file describes how to set up your printer driver installer and contains the most up-to-date information that was available at the time of software release. For information on the Printer Driver settings and features, please check the Help file.
The installation procedure requires an administrator account or the ability to "Run as Administrator" in the Windows operating system.
Prior to installation, be sure to close all applications before installing the driver.
For installing the driver by using the "Add a Printer" feature in Windows, please refer to that operating system's Help section.
1. Run "RV_SETUP.exe", which is located in the same folder as this readme.
2. The "End User License Agreement" dialog will appear. If you agree with the terms and conditions, select "Agree" and click "Next".
3. The "Select a setup method" dialog will appear.
4. To display network-connected devices, select "Network" and click "Next", proceed to Step 5a.
If a USB connection is desired, select "USB" and click "Next". Proceed to Step 5b. ("USB" might not be selectable depending on the device type.)
- Network -
5a. The "Select a device" dialog will appear. Select the device from the list of network-connected devices and click "Next". Then, proceed to Step 10a.
To change the driver name and/or the device name, select the "Manually enter the settings" checkbox. In that case, proceed to Step 9a.
6a. If the device cannot be found, click "Click if you cannot find the device". The "Select a search method" dialog will appear.
a. To specify the device's IP address, select "Specify device IP address" and click "Next". Then, proceed to Step 7a.
b. If the device's port has already been configured or if a new port needs to be configured, select "Specify device name" and click "Next". Then, proceed to Step 8a.
7a. The "Search by IP address" dialog will appear. Enter the IP address and click "Search" to search for the device. If the device is found, click "Next". Then, proceed to Step 10a.
8a. The "Select a device" dialog will appear. Select a device and click "Next".
9a. The "Printer Preference" dialog will appear. Choose one of the following methods to set up the port:
a. If the port has already been registered, select the port to "Port Name".
b. To specify a new port, click "Add Port". The "Add Port" dialog will appear and a new port can be added. After that new port has been added, the name of it will be selected.
10a. When installation has completed, the "Complete" dialog will appear. Click "Finish".
- USB -
5b. The "Select Device" dialog will appear. Select the device name or connect the device with USB cable, and click "Next".
6b. The "Install" dialog will appear. When installation has completed, the dialog changes automatically.
7b. When the "Connection with device" dialog appears.
a. If the device is not running and not connected with USB cable, turn on the device and connect with USB cable.
b. If the device is running and connected with USB cable, wait a moment.
8b. When the device is detected, the dialog changes automatically.
9b. The "Complete" dialog will appear. Click "Finish".
If the printer driver is already installed, upgrade the printer driver.
Prior to installation, be sure to close all applications before upgrading the driver. Be sure to close all applications before installing or upgrading the driver.
All brand names and product names mentioned in this document are trademarks or registered trademarks of their respective companies.